Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13695340
- Product Categories
- Keshi Da UPS power supply
- Hills UPS power supply
- Branch UPS power supply
- APC UPS power supply
- Matsushita Battery
- Yuasa Battery
- Germany sunshine battery
- Dorset Battery
- Friendly Links
Information Name: | Supply Hills C3K latest standard model parameters, quotes |
Published: | 2015-05-04 |
Validity: | 30 |
Specifications: | 3KVA, labeling machine, 96V |
Quantity: | 300.00 |
Price Description: | |
Detailed Product Description: | Hills ups Performance Castle Hills Series C 1KVA ~ 3KVA is set Hills latest R & D achievements and application experience, design and manufacture a new generation of general-purpose UPS, the product is suitable for small and medium users in IT load device Hills-line UPS products Latest Release yield - (New) Hills C1K / C1KS / C2K / C2KS / C3K / C3KS Hills Castle (Castle) series online UPS, including capacity 1KVA to 20KVA UPS series of products, compared with line-interactive or back-UPS , the load-line UPS can provide better power supply environment, consider whether in terms of voltage output range, frequency range, input noise filter, as well as AC mode and battery mode zero transfer time, on-line are the most UPS excellent structure, therefore, important equipment, or the harsh environmental requirements for power equipment must be selected almost-line UPS. (Hills company will not of innovation) C 1kVA ~ 3kVA (new) technical parameters DSP digital control technology application of advanced DSP digital control technology, more stable performance of the UPS, quality is more superior. Load power factor of 0.8 for the development trend of electrical equipment, with a capacity to carry more. Active input power factor correction (PFC) Using digital control of active power factor correction technology, the input power factor above 0.98, in order to avoid contamination of the environment on the grid to save energy, reduce investment costs of the system. This product is environment-friendly green products, in line with the requirements of EU environmental directives RoHS and the National Electronic Information Products Pollution Control Regulations, the product under normal use will not cause harm to humans and the environment. Wide input voltage and frequency range is extremely wide input voltage and frequency range, even in very poor power environment of the normal power supply in remote areas can reduce the number of battery discharge, improved battery life. 50Hz / 60Hz power supply system of adaptive automatic recognition and adaptation 50Hz / 60Hz power supply system to meet the needs of different power systems. Can be used with generators Wide range of input voltage and frequency range, can effectively isolate the adverse power generator for the load to provide clean, safe and stable power supply. Zero switching Mains unstable, UPS power supply mode conversion time is zero, effectively ensuring the safety and reliability of the load operation. Powerful extensibility features Smart slot can provide a wealth of scalable features, you can choose to install Winpower CMC monitoring card, SNMP card, RS485, AS400 card, EMD environmental monitor. (New) Hills-line UPS power supply - Hills C1K / C1KS / C2K / C2KS / C3K / C3KS Specifications Hills Model C1K C1KS C2K C2KS C3K C3KS rated capacity 1kVA / 0.7kW 2kVA / 1.4kW 3kVA / 2.1kW input voltage (115 ~ 300) VAC frequency (40 ~ 60) Hz (software adjustable) Output voltage 220 × (1 ± 2%) VAC input frequency synchronization utility mode [], when the mains frequency is outside (46 ~ 54) Hz range, The output frequency is 50 × (1 ± 0.2%) Hz 50 × (1 ± 0.2%) Hz battery mode [] backup time (full load / half load)> 5 '/ 14' ----> 9 '/ 21' - ---> 5 '/ 15' ---- Battery Type VRLA battery VRLA batteries ---- ---- ---- VRLA batteries external battery nominal voltage --- - 36VDC ---- 72VDC ---- 96VDC Dimensions (W × D × H) (mm × mm × mm) 145 × 400 × 220 192 × 460 × 340 Weight (net) Kg 14 7 34 13.5 34.5 14 UPS Power Products Hills Hills UPS power supply company providing the service, APCUPS configuration, Emerson room design, Delta and UPS matching program, Merlin Gerin distribution design, Keshi Da UPS solutions and EPS emergency power selection and configuration, and provide products and services; network cabling, power supply systems integration, computer room renovation works are within the scope of our services, network security monitoring services in the banking and securities room system integration and power engineering plant and other industries emergency switchboard. Hills on the sale of UPS, Keshi Da UPS Emerson UPS free warranty for three years, MGE UPS and APC UPS free warranty for two years; Shenyang Matsushita Battery, Hills batteries, Yuasa batteries, Hercules batteries, CSB batteries and Germany sunlight and other brands of sealed lead-acid maintenance-free batteries free three-year warranty. In the company's development process, expanding the field of product promotion by the improvement of technical services, specialized companies to further establish a good demeanor, in access to customer satisfaction and trust Zhongshi companies continue to grow progress, and every step in order to achieve the highest user satisfaction. The company aims to: customer first, the credibility first, quality first, dedicated service. Hotline: 010-80445817 World News Hills small power Hills Power (Shenzhen) is specialized in the Hills ups uninterruptible power supply (UPS) to develop, Hills Power production and operation of an international power supply manufacturer. Has set up seven offices in China Beijing, Shanghai, Shenzhen, Shenyang, Chengdu, Wuhan, Xi'an, the production base in Shenzhen, products ranging from 500VA to reserve online 640kVA Power and Machine Hills Power series, to meet the different user industries needs. Hills Power supply companies to enter China more than two decades, with strong R & D strength of electronic technology, reliable product quality, comprehensive, fast and efficient after-sales service system, has been unanimously endorsed by the domestic industry users, the power supply has been widely used government, finance, telecommunications, electricity, transportation, scientific research institutes, manufacturing and military industries, tens of millions of users are relying Hills UPS to provide security for its equipment, reliable Hills Power environment. Friendship Century Love Tip: To ensure the safe use of Hills ups, observe the following points: 1, Hills products specially designed for PC design, is not recommended for life-support systems and other specific important equipment. 2 Do not exceed the rated load use ups. 3 Hills ups with large capacity battery, never open the case, otherwise it will cause an electric shock, etc. For internal maintenance, replace the battery, delivered Hills designated repair point. 4, ups if an internal short circuit can cause electrical shock or fire hazard, it may not be filled with liquids should be placed at the top ups, so as not to cause electric shock and other hazards. 5, if the machine smoke, immediately turn off the power, and contact your dealer or service outlets. 6. Do not keep or use this product Hills ups in the following environments. 7. flammable gases, corrosive substances, a lot of dust in the workplace, abnormal high or low temperatures (above 40 ℃ or below 0 ℃), high temperature (90 ℃ above) places, in direct sunlight or near heating appliances place, excessive vibration outlets, an outdoor 8, in case of fire around, use dry chemical fire extinguisher. Liquid fire extinguisher danger of electric shock. 3 How to make Hills ups power usage time longer concerned about the environment, so that UPS, UPS power supply harder has gradually become an important device "protection of God", but in the long process of using the UPS, if we do not start from the human point of view , to "care" it, to maintain it, to believe it frequently work under pressure and will soon be aging! In order to effectively extend the UPS life, I believe we all use our brains, to seek the best maintenance tips, the author is no exception; it does not, in and UPS, Hills Power long dance days, starting from the details the author summarizes some Let ups Power "eternal youth" bag of tricks, I believe they will bring a fresh shock! Compared computer handsome appearance is, UPS does look a little rustic, but it "bones" is very "fragile", because it has a different working environment general requirements. Product details, please consult Merlin UPS Power Products First, UPS is love clean, dust special "cold", you know UPS waving long-term work in dusty environments, it is easy, "sick", it is because Dust can quietly "drill" to UPS, Hills ups the control box and direct coverage in its electronic circuits, over time the circuit will work inside the UPS cooling efficiency, long past the naturally prone to failure. Secondly, UPS also afraid wet, after all, there are electronic circuits inside the UPS, the various components of the electronic circuit in wet environments and long-term work, its electrical properties will gradually decline, but also the possible leakage, posing a fire accident. Third, UPS is also very sensitive to the ambient temperature, above 40 ℃ environment or below 0 ℃ environment make it work, "enthusiasm" is not high, especially in its "potential" can not be fully realized. Fourth, UPS, ups power supply in the environment can not be surrounded by a strong magnetic field, which means that it can not be put together with the device having magnetic properties, as the UPS shielded innate capacity is very limited, if long in a strong magnetic field in the work environment, then, UPS will greatly shorten the life! In view of this, we want as much as possible for UPS to create a comfortable working environment, such as the best should be UPS, MGE ups working temperature control in about 25 ℃, at this temperature for optimum performance UPS battery charge ; preferably placed around UPS ventilation, away from dusty environments, so that UPS can ensure adequate heat after long hours of work. Once there is a good working environment for the premise, UPS will be more "hard" to serve us! 4 Hills Power boost financial development of the financial exhibition attracted nearly 200 financial equipment manufacturers as well as Bank of China, ICBC, including nearly 50 major banks in the country to attend. The show described as flourishing, contending, many exhibitors competing to launch the world's leading financial equipment and software, solutions, highlights the technical innovation capability to support the development of the financial sector to lead. Hills Power is as a professional in uninterruptible power supply (UPS) development, international manufacturers and operators, and again have the opportunity to participate in the event. This year, electronic Hills, Hills ups to join the parent company ---- American Eaton Group, as well as Brother Eaton Powerware (Powerware) and Pulsar series, along with escort for the financial system run on electricity. The exhibition on power ups only shows the well-known castle series 1-3K, EX20-40K, ARRAY 3A3 and other well-known products, also introduced onto the market this year, the latest products, such as: ARRAY MP, British shield PALACE 1-3K series and intelligent power distribution cabinet. As the industry's only "Famous Chinese Trademark" honorary title of UPS manufacturers, Hills company closely Conference "green technology" theme, we have been focusing on environmental protection, in promoting the development of the industry, and maintain technology leadership to make a lot of work. Hills, MGE ups is the first to introduce green lead-free products factory production line, in 2005, passed the ISO14001 environmental quality management system, and according to their own business situation, developed a series of green, environmentally friendly, energy-saving standards and implementation specifications. 4 Hills ups solutions TSMC's production plants in mainland cities, using more than 500 sets, UPS Product details, please consult with Emerson air conditioning products center. UPS realized centralized management has become an important factor to protect the safe operation of the load, consult Hills UPS power supply products center, UPS offers a diverse variety Hills, is divided into five major series more than 20 specifications, which UPS centralized monitoring and remote management put forward higher requirements, Hills offers a set of comprehensive, reliable, and effective remote monitoring and management solutions for this problem, use the UPS Hills RS232, RS485 interfaces and AS400, Winpower, Webpower interface card, with a variety of management software , you can easily achieve local single, multiple local, remote single, multiple remote, centralized management of the cluster, so that the health of the country of UPS is easier to handle. Please refer to the detailed description of UPS Products Hills long time service in the industry groups, which customers have integrated production capacity of the world's first factory --- TSMC. In order to solve the power problem of different formats over the years, Hills has to plant more than 500 sets of customized special specifications of UPS, MGE UPS products guarantee the normal operation of the center of its production. If the local Taiwan, the solution is quite simple, as long as the Configuration "Input / Output" is a three-phase 200V, 50Hz / single phase 110V, 50Hz of UPS power supply. However, these production facilities in mainland output must be configured to use a three-phase 200V, 50Hz / single phase 110V, 50Hz power supply, in order to protect the normal operation of production equipment and products, we need to configure special specifications UPS. Product details please refer to the Delta Center 5 UPS UPS products supply problems in many data centers in the purchase of UPS and UPS definitely interested in pursuing efficiency and want to once and for all, a large-scale blind UPS power supply equipment. This is precisely the power of both waste culprit. Theoretically, if you run a load of greater than 50%, the efficiency of UPS is generally up to 90%. However, in practice, many data center UPS operating load rate is generally also in about 20%, UPS power supply efficiency is generally only 50% to 60%! Green UPS should be at low load rates can have high efficiency. In this regard, APC-MGE solutions more worthy of reference, it's taken a new dual-UPS power conversion inverter technology, inverter design with respect to the original design was reduced by 50% of the loss, low-power controllers, drives equipment and a buffer circuit load loss reduced by 30%. Product details please refer to the network cabinets Products, these new technologies to improve UPS efficiency at low load factor has a vital role. At the same time, the modular UPS application, to promote "demand configuration UPS capacity" to improve UPS efficiency by increasing the load factor of UPS systems. Description Please refer to APC UPS Power Products. Currently, the data center UPS power supply main problem in two ways. First, lower UPS power supply load, less than the effective operation of the state; the second is the size of the blind expansion of UPS power supply lead to run inefficient. Therefore, the "green" in the power section is mainly reflected in enables UPS with high efficiency at low load rates. Product details, please consult EPS Emergency Power Products. 6 using UPS power supply Note 1) normal boot sequence exists due to the general load inrush current at the moment of starting, and UPS, Hills Power internal power components have a certain range of safe operating area, although we have left some in the selection device margin, but it had a big impact on the current or shorten the life of components, and even cause damage to the components. Therefore, it should be used to minimize the impact of current harm. Usually UPS, Hills ups during bypass operation, impact ability, we can take advantage of this feature in the following manner at boot time were: first to send electricity to the UPS power supply, ps, it is in bypass operation, and then opens each load, the first to open a larger load inrush current, and then open the smaller the impact of current load, and UPS power supply panel, it is in the inverter state. Boot all loads must not be open at the same time, and do not load the boot. 2) The shutdown sequence shutdown sequence is as follows: first by-turn off the load, then the UPS power supply, ups power panel off, so UPS power supply in the bypass operation and continues to charge the battery pack charger. If you need UPS power supply has no output, the UPS power is completely turned off, and then disconnecting the mains input. Product details please refer to the power supply 7 Power Products installation and operating environment of UPS installation quality directly affects the Hills Power system in the future, long-running, especially medium and large UPS power supply, UPS power supply and therefore medium-sized planning to install the process should be standardized. Product details please refer to the center of UPS products in general, ups power when installing the main consideration the following factors: the grid, the load capacity and characteristics, the use of the environment, grounding, wiring and switching capacity. 1) grid voltage fluctuations mainly include the scope, power and frequency to determine with Hills ups spare time. If necessary, the addition of other protective measures pole before UPS. Product details please refer to the APC UPS Power Products 2) Ambient temperature: 0 degrees -40 degrees Celsius requirements Humidity: Requires 10% to 90% of the fallout: UPS power supply to keep the surroundings clean, thus reducing harmful dust on the UPS power supply corrosion inside the structure line: UPS power supply when the long delay configuration, the battery may heavier, you should consider the size of the problem space floor loading: MGE ups should ensure maintenance, the engineers have some room for 3) Ground In the case of a computer system in order to ensure stable and reliable operation of computer systems to prevent the parasitic capacitive coupling interference, protective equipment and personal safety, it is necessary to have a good grounding system. In the grounding system to be an earth ground resistance is good or bad, the general grounding resistance less than 5Ω better. Product details, please consult Emerson UPS Power Products 4) distribution requirements Shenzhen Hills UPS power distribution can refer to data in the following table, the products detailed description please refer to the Hills UPS power supply configured 8 Power Products UPS power supply discharge time is on battery energy storage to power the load, the standard of the Hills Power in own machine comes with a battery, in general it can continue to supply power after a few minutes to a few minutes, but long-term type of UPS is equipped with an external battery pack, users can For prolonged power outages continue to supply the needs of the general long-term type of UPS full load configuration time up to several hours or more. Product details, please consult Keshi Da UPS products centers generally long-acting Hills ups spare time is mainly affected by the cost of batteries, limiting the installation space and battery recharge time and other factors. Generally poor power environment, power outages are more frequent in areas with the use of power ups and generator-powered mode, see diagram. When a power failure, UPS power supply battery-powered first by a period of time, such as power outages longer time, you can start the standby generator to continue to supply UPS power when utility power is restored and then switch to the mains supply. Battery life calculations, please refer to the detailed description of the product UPS Battery Products Battery life is mainly affected by factors affecting the load size, battery capacity, ambient temperature, battery discharge cut-off voltage. General computing power UPS battery life, you can calculate the battery discharge current, discharge time and then find out it according to the battery discharge curve. Battery discharge current can be calculated by the following empirical formula: Discharge current = UPS power capacity (VA) × power factor / battery discharge average voltage × efficiency To calculate the actual load discharge time, MGE ups simply change the actual load capacity Capacity can be. ? 9 Hills ups power in life Application of:? Ups uninterruptible power source: Use power ups ups ups uninterruptible power supply applications every time you speak with power ups which are used in the office or industrial sector , did not say in real life we ??use power ups, and today ready to tell us something about the ordinary UPS, UPS now ordinary electrical design philosophy is to emphasize its focus on uninterrupted. Product details please refer to the UPS power supply products for ordinary UPS center, a power failure just chance events, rather than necessarily the case will happen at least once or twice a day. So in the design of its charge, the inverter circuit does not take into account, in application of the charge so frequently even in a relatively short period of time a large capacity battery pack is fully charged, and work long hours in battery inverter mode Such applications. With the international fuel price increases, increased power generators will undoubtedly increase the cost late. And there are no communication between ordinary UPS and generators. Takes a long time to work out of the car, the boat will be equipped with the vehicle-mounted generators. Product details please refer to the Hills of UPS Products common type of UPS rectifier charging and inverter output are carried out simultaneously. That generator to simultaneously bear the load and the power required for charging. Hills UPS on generator power ratio of at least 1.5 to 3 times than the large UPS. So ordinary UPS charging circuit is relatively simple, usually charging current is not too large. This makes it impossible to adapt ordinary UPS travel application work characteristics. Product details, please consult Emerson UPS products center after the battery is full, we need someone to turn off the generator in order to save fuel. Similarly, when the low battery when you need someone to start a generator to recharge. General car, aboard are based on a small number of technical staff mainly work process also distracted attention to the situation of the power system, wasting valuable time and effort. So in actual fact, the process of ups power has played a significant role in real life. ? 10 use and maintenance Hills ups power Author:? Ups Power source: Reason Hills ups power supply network Hills ups power supply network use UPS power supply and maintenance problems caused by these problems relate UPS power supply itself quality, UPS installation quality, user quality of the three aspect. This requires the selection meet the requirements of the UPS power supply and correct installation of UPS. In terms of quality primary user specific use of environmental quality by the user, power quality and routine maintenance quality decisions. In the course of using the UPS power supply, sometimes found when action would not achieve the uninterruptible power supply UPS mains power failure, UPS battery failure or a significant decline in the discharge capacity in a short time, during normal charging and float current phenomenon of fever a significant increase, these problems affect the user to load. Product details please refer to the UPS power supply Products (1) Due to the presence of the general load inrush current at the moment of starting, excessive current may shorten the life, and even cause damage. In general should be used first to UPS power supply, it is in bypass operation, and then opens each load, the load current to avoid the impact of the UPS, so that the life of UPS is extended. Shutdown sequence is the first one by one off the load, and then shut down UPS, so the UPS power in bypass and continue charging the battery pack charger. Product details please refer to the Hills of UPS Products (2) UPS battery the two internal and external components, built-in battery, UPS is relatively easy to use, problems UPS and battery host connection does not exist. The external battery, UPS must pay attention to problems between the host and the battery pack is connected. You must first press the polarity of the battery pack even better, and check the voltage, the voltage magnitude and good battery UPS Host Requirements compliance, be considered properly connected. Under normal circumstances, the load-line UPS should be controlled at 70% to 80%, while the load standby UPS should be controlled at 60% to 70%. At the same time, excessive light load is not good, although not as severe overload. Product details please refer to the APC UPS Power Products (3) UPS systems according to the requirements of power margin is not, it should not be loaded with use. Do not follow UPS's rated power to use, do not think empty interface should not be idle while connected to other appliances, the long-term full load condition will directly affect the life of the UPS. Second, open the UPS host and host measuring UPS charging voltage, the voltage value is correct. Finally, according to the polarity of the battery pack and the UPS host connected. In the application, often occurs due to the UPS battery connection error, causing the battery cable is damaged or UPS charging circuit damage accident. (4) When the UPS battery failure, you should investigate the cause. Failure to distinguish the source of the load or the UPS power supply system; a host or a battery pack. (5) UPS power to the host routine maintenance work is mainly dust and dust regularly. Secondly, at the time of removal, check the connectors and plug-in contacts loose and strong. Product details, please consult with Emerson air conditioning products center although UPS host has failed self-test function, but it is not to the point opposite, although replacement parts are easy to repair the fault but still need to do a lot of analysis and testing. (6) For long idle before the UPS, and then back into use, make the best use inside the UPS battery charging circuit float 10 ~ 12h later reuse. (7) host a breakdown, insurance blown or burned malfunction of the device, be sure to identify the cause and troubleshooting to restart, otherwise it will continue the same failure. For users of backup UPS, the long-term if the UPS is operating in back-up work, it is recommended once a month, so that UPS is in inverter operation for at least 2 ~ 3min, in order to activate the battery. Product details, please consult Emerson UPS power supply Products 11 Basic Use 1) normal boot sequence due to the presence of the general load inrush current at the moment of starting, while Hills Power internal power components have a certain range of safe operating area, even though we in the selection It will leave some margin the device, but too large inrush current or shorten the life of components, and even cause damage to the components. Therefore, it should be used to minimize the impact of current harm. Usually Hills UPS work at bypass, impact ability, we can take advantage of this feature in the following manner at boot time were: first to send electricity to the UPS, it is in bypass operation, then one by one to open the load, first open large load inrush current, and then open the smaller the impact of current load, and MGE ups power panels to the inverter is in working condition. Boot all loads must not be open at the same time, and do not load the boot. 2) The shutdown sequence shutdown sequence is as follows: first by-turn off the load, and then shut down UPS power panel that UPS power supply in the bypass operation and continues to charge the battery pack charger. If you need UPS power supply has no output, the UPS power is completely turned off, and then disconnecting the mains input. . Power supply 12 Power AC load characteristics of the load device is generally divided into two small single-phase and three-phase power load, power from a few hundred VA to 100KVA, generally use single-phase power supply, UPS selection of single-phase output; and power load power from tens of KVA to 1000KVA, multi-use three-phase power supply, and therefore need to use three-phase outputs Hills Power Load type can generally be divided into resistive, inductive, capacitive and other linear load and contains a rectifier circuit The non-linear loads (also known as rectifier load). computers and peripheral equipment, mostly non-linear loads. Hills UPS for resistive load and rectifier with capacitive load. inductive and capacitive loads are nonlinear load start there are inrush current, computers and other rectifier load even in normal operation, the crest factor is also 2-3, the peak current of its effective value of 2 to 3 times, and therefore should be considered in the selection of UPS to this feature, should give UPS, MGE UPS leave some margin for some low power factor inductive loads such as air conditioners, because of start-up current is quite large, up to 5 to 7 times its rated value, and frequently start, so most small and medium UPS does not apply unless sufficient margin. |
Admin>>>
You are the 20436 visitor
Copyright © GuangDong ICP No. 10089450, Beijing Jin Yi Jia Technology Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 20436 visitor
Copyright © GuangDong ICP No. 10089450, Beijing Jin Yi Jia Technology Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility